Plank on Ply

This method is most often used to build height to match marble and granite entry tiles or to patch and repair a variety of subfloor surfaces during renovations.

12mm plywood sheets are adhered and nailed or anchored to the concrete or other subfloors. Low profile floorboards are adhered and nailed onto the plywood. The timber floorboards are sanded and finished on site same as with direct fixed.

The floor height (22 -26mm) may require onsite and unforeseen trimming of doors, reducer splays to other floor levels, bathrooms tiles etc. This method can be problematic in some kitchens, at sliding doors and apartment fire doors.

Please note the plywood sheets do provide an adequate moisture or acoustic barrier and will not make the timber floor “softer” to walk on as some companies claim. A clean sub-floor is required for the plywood bond as with the Direct Fix method.

Flooring Essentials:

  • Floor height 22-26mm.
  • May require splays down to match other floor heights.
  • May require doors to be planed (to open) and bench and skirting board height lost.
  • Alternatively the concrete sub-floor will need to be recessed in the area to accommodate.

Start Planning Your Project 

Strip Flooring and Parquetry

We specialise in Direct Fixed installation, the most common method for installing floors over concrete slabs throughout Western Australia. 

Timber Stairs

Timber clad concrete or MDF staircases are becoming increasingly more popular as more double storey houses and units are built or carpets are replaced as part of a home renovation.

Beading and Skirting Boards

All timber floors must have an adequate expansion gap when installed as specified by the Building Codes. This is to allow space for the timber to expand and contract with seasonal changes. 

Engineered Floors

At Perth Timber Floors we often jokingly refer to the engineered systems as the cake mix of the timber floor world. This is because like cake mix the messy, dusty, sometimes smelly process of sanding and polishing has been done in the factory, ready to deliver to site and install.

Plank on Ply

This method is most often used to build height to match marble and granite entry tiles or to patch and repair a variety of subfloor surfaces during renovations. 12mm plywood sheets are adhered and nailed or anchored to the concrete or other subfloors.

Repairs, Renovations and Remodeling

Remodeling your kitchen is the best way to update your home. In most cases, this means changing the cabinet layout or footprint, which ultimately means changing your entire floor.

Perth Timber Floors

We are a Perth based business, installing some of the finest floors in Perth homes and businesses since 1991. 

Perth Timber Floors © 2020

Follow Us

Opening Hours
Monday - Friday 10am - 2.30pm
Saturday 8.00am - 12pm
Please call prior to visiting as we may be on-site.

0448 475 115

mark@perthtimberfloors.com.au

2/42 Ardross Street Applecross, WA 6153

Additionally, paste this code immediately after the opening tag: